Laboratory Mist Eliminator Stainless Steel φ 115mm Demister
ISO9001-2015
Wire mesh mist eliminator typical applications:
Absorber,
Scrubbers,
Evaporator,
Steam drums,
Knockout drums,
Separators vessels,
Refining lube towers,
Refining vacuum tower,
and any process vessels handling liquid and vapor where complete
separation of entrained liquid droplets is desired from gas/vapor
phase.
Optimized solutions
Standard configurations
Tailored made configurations
Expedited services available
knowledge and engineering experience
High quality manufacturing standards and procedures
Manufactured in a variety of corrosion resistant materials (Metals,
Plastics and Co-knit mesh options)
Mist eliminators or Demister pads are porous blankets of metal or plastic knitted wire mesh,
designed and constructed for the efficient, economical removal of
entrained liquid droplets from vapor streams. Demister Pads can be
fabricated in any required size and shape and may be installed in
new or existing process vessels.
HOW IT WORKS
When vapor and entrained liquid droplets pass through a mist
eliminator, the vapor moves freely through the mesh pad but the
liquid droplets, due to their greater inertia, cannot make the
necessary sharp turns and as a result are thrown into contact with
the wire surfaces and briefly held there. As more droplets enter
the pad and collect on the wires, they grow in size, run down the
wire to the bottom surface of the mesh separator and fall from the
unit. Overhead vapor is now free of entrained liquid.
Demister Inquiry Table if Calculation Suggestions and Service are
needed
| Please State your demister / mist eliminator application |
|
| Operating data |
| Gas | Max. gas volume flow (operating conditions) | M3/h | |
| Gas density (operating condistions) | Kg/m3 | |
| Operating pressure | Bar (a) | |
| Operating temperature | ℃ | |
| Liquid | Liquid content | Kg/h | |
| Liquid density | Kg/m3 | |
| Dynamic viscosity of the liquid | mPas | |
| Geometrical data |
| Flow direction | Horizontal | ¨ |
| Vertical | ¨ |
| Installed in | Column | ¨ |
| Pipe | ¨ |
| Column diameter or dimensions | mm | |
| Opening for installation | Manhole | ¨ DN |
| Vessel flange | ¨ Size |
| Requirements |
| type of mist eliminator | Wire mesh demister | |
| Material | | |
| Efficiency of separation | % | |
| Max. pressure drop | | |
| Miscellaneous | | |
Please pay attention to the Unit when refering to this sheet.
