Sign In | Join Free | My himfr.com
Home > Mesh Pad Demister >

Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order

Beijing Silk Road Enterprise Management Services Co.,LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order from wholesalers
     
    Buy cheap Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order from wholesalers
    • Buy cheap Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order from wholesalers
    • Buy cheap Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order from wholesalers

    Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order

    Ask Lasest Price
    Brand Name :
    Model Number :
    Certification : ISO9001
    Price : to be negotiated
    Payment Terms : T/T, L/C
    Supply Ability : 1999 pcs per week
    Delivery Time : 5-8 days
    • Product Details
    • Company Profile

    Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order

    Teflong wire mesh type demister pad size 580 mm in diameter order


    Demister Inquiry Table if Calculation Suggestions and Service are needed


    Demister / mist eliminator DATA


    Operating data
    GasMax. gas volume flow (operating conditions)M3/h
    Gas density (operating condistions)Kg/m3
    Operating pressureBar (a)
    Operating temperature
    LiquidLiquid contentKg/h
    Liquid densityKg/m3
    Dynamic viscosity of the liquidmPas
    Geometrical data
    Flow directionHorizontal¨
    Vertical¨
    Installed inColumn¨
    Pipe¨
    Column diameter or dimensionsmm
    Opening for installationManhole¨ DN
    Vessel flange¨ Size
    Requirements
    type of mist eliminatorWire mesh demister
    Material
    Efficiency of separation%
    Max. pressure drop
    Miscellaneous

    Please pay attention to the Unit when refering to this sheet.


    DEMISTER Use :


    1: Knockout drums and separators – save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up.


    2: Absorbers – reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems.


    3: Scrubbers – reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids.


    4: Distillation columns – improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals.


    5: Evaporators – prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems.


    6: High pressure steam systems – provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades.


    7: Refinery towers – increase throughput capacity-take deeper cuts for greater product yields – prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side draws-use lower grade crudes.

    DEMISTER Material Polytetrafluoroethylene

    DEMISTER Material Polytetrafluoroethylene has a very high chemical resistance, such as in concentrated sulfuric acid, nitric acid, hydrochloric acid, even boiling in aqua regia, its weight and performance have no change, and it is almost insoluble in most solvents, only slightly soluble in paraffins (about 0.1g / 100g) above 300 ℃. Polytetrafluoroethylene is non hygroscopic, non combustible, extremely stable to oxygen and ultraviolet, so it has excellent weather resistance. It should be noted that polytetrafluoroethylene can not withstand strong reduction atmosphere melting of alkali metals, ammonia alkali solution (alkali metals dissolved in liquid ammonia), some fluorides (such as TFA), naphthalene sodium salt, etc. can rapidly corrode polytetrafluoroethylene products. The dielectric constant and loss of polytetrafluoroethylene in a wide frequency range are very low, and the breakdown voltage, volume resistivity and arc resistance are high.


    The radiation resistance of polytetrafluoroethylene is poor. It is degraded by high energy radiation, and the electrical and mechanical properties of the polymer are obviously reduced. Polytetrafluoroethylene is produced by free radical polymerization of tetrafluoroethylene. Industrial polymerization is carried out by stirring in the presence of a large amount of water to disperse the reaction heat and facilitate temperature control. The polymerization is generally carried out at 40-80 ℃, 3-26 kgf / cm. Inorganic persulfate and organic peroxides can be used as initiators, and redox system can also be used as initiators. The exothermic energy per mole of tetrafluoroethylene is 171.38kj. Dispersion polymerization requires the addition of perfluorinated surfactants, such as perfluorooctanoic acid or its salts.


    Team is ready to help with what you need. Welcome your inquiry to !


    PTFE grids are optional in demister order.


    Quality Teflong Wire Mesh Type Demister Pad Size 580 Mm In Diameter Order for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Beijing Silk Road Enterprise Management Services Co.,LTD
    *Subject:
    *Message:
    Characters Remaining: (0/3000)