Pallet Package Container Loading Demister and Structured Packing
1. Structured Packing Material Comparison Table Worldwide.
Material, SS304, SS316L, others as per order.
2. Structured Packing Inspection Steps:
- Each batch of structured packing shall be inspected by the quality
inspection department according to the contract before leaving the
factory.
- The appearance of packing plate shall be flat and free of rust.
- The peak height, wave distance, inclination and tooth angle of the
packing shall meet the corresponding standards.
- The deviation between the accumulated length of the peak height of
every 100 pieces and the accumulated length of the actual product
100 pieces is: the positive deviation is not more than 1h, and the
negative deviation is not more than 2h.
- The diameter, Ovality and levelness of packing disc shall meet
corresponding requirements.
- For the hole diameter d0, hole center distance t and fine grain on the plate, only visual
inspection shall be conducted, and the hole shall be free of burr,
and the holes and fine grain shall be evenly distributed.
- The allowable deviation of steel strip thickness shall comply with
the provisions of GB / T 4239.
3. Structured Packing Marking, Packaging, Storage and Transportation
- Packing list shall be provided for finished structured packing,
including product name, model, specification and size, manufacturer
name and production date. At the same time, the product inspection
certificate shall be provided, including inspection items,
inspection date and seal of inspection personnel.
- The finished products shall be packed in cartons, wooden boxes, or
wooden plates, and the packing tray shall be placed horizontally.
The name and model of the product, the name of the manufacturer and
the quality of the product shall be indicated on the outside of the
packaging box, and the words or marks such as "strictly prevent
humidity" shall be included.
- It is strictly prohibited to impact the product and rain it
directly during transportation.
- Products shall be stored in a ventilated and dry room, and shall
not be stacked laterally.
4. Structured Packing Options
Structural dimension and characteristic parameters of stainless
steel orifice corrugated packing.
| Item | Unit | 125X | 125Y | 250X | 250Y | 350X | 350Y | 500X | 500Y |
| corrugation height h | mm | 24.0 | 11.5 | 8.4 | 6.0 |
| corrugation inclination θ | (°) | 30 | 45 | 30 | 45 | 30 | 45 | 30 | 45 |
| corrugation distance 2B | mm | 39.6 | 19.0 | 14.0 | 9.9 |
| corrugation angle β | (°) | 79.0 | 79.1 | 79.6 | 79.0 |
| void fraction ε | δ=0.15mm | % | 99.4 | 98.6 | 98.0 | 97.2 |
| δ=0.12mm | % | 99.5 | 98.9 | 98.4 | 97.8 |
| δ=0.10mm | % | 99.6 | 99.1 | 98.7 | 98.2 |
| Perforated hole diameter d0 | mm | 4.5 | 4.5 | 4.0 | 4.0 |
| Opening rate σ | % | 8.5-9.5 | 8.5-9.5 | 9.0-10.0 | 9.0-10.0 |
| radius of curvature of the top circle of corrugation angle R | mm | ≤2.0 | ≤1.4 | ≤0.9 | ≤0.5 |
Note: The influence of opening rate on the plate is not calculated
5. Structured Packing Workshop
every year we manufacture and supply hundreds of cubic meters of
metal structured packing in different models. There are many
popular types and materials for option. Custom order is welcome,
too! We are happy to help with what you need!
